Creality3D Ender - 3 DIY 3D-printerkit

- NACHT US PLUG 267903901

220 x 220 x 250 mm MK10 Extruder 1,75 mm 0,4 mm mondstuk
€151.30
  • GRATIS VERZENDING Verzenden tussen: Nov 13 - Nov 15, Geschatte levertijd: werkdagen Het verwerken van de bestelling kan enkele dagen duren. Zodra deze vanuit het magazijn is overgebracht, is de duur van de verzending afhankelijk van de verzendingsmethode.
  • +
  • rentevrij U kunt profiteren van maximaal 0 rentevrije betalingstermijnen, en u kunt mogelijk niet profiteren van deze aanbieding wanneer u bestellingen plaatst met andere producten
;   
Belastinginfo Prijsbescherming Prijsdisclaimer
Opruiming

AlKan

4.7/5.0
  • 5 Ster 78%
  • 4 Ster 19%
  • 3 Ster 2%
  • 2 Ster 0%
  • 1 Ster 1%

Aanbevolen producten voor u

Klanten van dit product, kochten ook

Hoofdfuncties
● MK-10-extruder vermindert het risico van verstopping en slechte extrusie aanzienlijk
● V-sleuf met POM-wiel zorgt voor geruisloos, soepel en duurzaam rijden
● Structuur uit één stuk biedt grote afdrukafmetingen
● Semi-knockdown-pakket zorgt voor een snelle montage
● Beveiligde voeding, bereikt 110 graden Celsius in ongeveer 5 minuten
● Extra beveiliging tegen stroomuitval om te voldoen aan de behoeften van snel verwarmen en langdurig printen
● CNC-bewerking van de Y-rail-montagegroef voor een nauwkeurige positionering en afdrukkwaliteit
● Nieuwe viscoseplatformsticker lost scheefheidsprobleem op

Specificatie

Algemeen

Merk: Creality3D
Type: DIY
Model: Ender - 3
Gravure nauwkeurigheid: 0.1mm
Nozzle quantity: single
Mondstuk diameter: 0.4mm
Product vormende grootte: 220 x 220 x 250 mm
Laagdikte: 0.1-0.4mm
Print snelheid: Max. 180mm / s
Ondersteunend materiaal: buikspieren,PLA,TPU
Bestandsformaat: G-code,OBJ,STL
Verpakkingssoort: ongemonteerde verpakking
Voltage Range: AC 100 - 265V (ingang)
Type connector: SD-kaart

Dimensies en gewicht

Productgewicht: 7.8000 kg
Pakket gewicht: 8.0000 kg
Product size: 44,00 x 41,00 x 46,50 cm / 17,32 x 16,14 x 18,31 inch
Pakketgrootte: 50,50 x 39,00 x 17,50 cm / 19,88 x 15,35 x 6,89 inch

Inhoud verpakken

Inhoud verpakken: 1 x DIY 3D-printer
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug
Creality3D Ender - 3 DIY 3D-printerkit- Night US Plug

We denken dat u leuk vindt

Klantvragen en -antwoorden

  • Alles
  • Productinformatie
  • Voorraadstatus
  • Betaling
  • Info over verzending
  • Andere

0 Vraag en antwoord Alles weergeven>

Gesponsorde producten die gerelateerd zijn aan dit artikel

Klantbeoordelingen

4.72 out of 5
  • 305
  • 69
  • 4
  • 3
  • 6
  • Gianluca
    Una stampante economica che vale molto di più delle altre nemiche!
    La stampante è arrivata nei tempi previsti con un adeguato imballaggio.
    Si configura come stampante Kit ma in realtà richiede l'assemblaggio solo delle parti principali come montanti verticali, alimentatore, asse X, motore asse Z e alcuni cablaggi.

    Assieme alla stampante vengono forniti tutti gli utensili per il montaggio oltre ad una indispensabile spatola affilata e un piccolo tronchese per i filamenti.
    Fornita anche una micro SD da 8Gb con adattatore USB.

    L'assemblaggio richiede circa un ora, le istruzioni sono abbastanza chiare ma alcuni video su youtube approfondiscono sicuramente meglio alcuni aspetti al quale fare particolarmente attenzione come la verifica dei corretti allineamenti e la regolazione della giusto attrito tra ruote e guide.


    Una volta montata la stampante e allineato il piatto è praticamente pronta per stampare anche per un principiante.

    Il volume di stampa è 220 x 220 x 250 cm anche se il fine corsa degli assi X e Y raggiunge in realtà i 235mm
    Il piatto riscaldato ha un ottima aderenza, Si riscalda velocemente (le temperature testate personalmente per il PLA tra i 50° e 60°)

    L'alimentatore ha un fondello chiuso con connettore per il cavo di alimentazione che evita quindi di lasciare esposti i cavi come su alcune stampanti Kit, è presente anche il tasto di accensione e spegnimento.

    Lo schermo è in una posizione molto comoda per lettura e utilizzo dei comandi, peccato che il circuiti sul retro siano scoperti ed è ovviamente consigliato stampare un carter per chiuderlo.

    il gruppo estrusore svolge il suo lavoro ma prevedo di sostituire le parti in plastica con delle nuove in alluminio così come un nuovo tubo PTFE
    La qualità delle stampe è comunque ottima anche senza aver ancora effettuato sostituzioni grazie sopratutto alla struttura decisamente solida.

    PRO:
    Rapporto prezzo volume di stampa
    Struttura molto solida
    Alimentatore con cablaggio chiuso
    Facilità di montaggio (in rapporto ad altre stampanti KIT)
    Qualità di stampa

    CONTRO:
    Gruppo estrusore in plastica
    Retro dello schermo senza protezione.
    inserimento micro SD abbastanza scomodo

    Oct 19,2018

    Was this review helpful?

  • Sergio Samaniego
    Ender 3, excelente relacion calidad-precio
    Andaba en busca de una impresora 3d para iniciarme en el mundo de la impresión 3d con fines recreativos, anduve viendo reseñas y vídeos hasta que me topé con esta Ender 3 que según las críticas se lleva de calle a la anet a8 o cualquier prisa i3, la compre por $3500 pesos MX más envio y la verdad es que está excelente, todo viene correctamente empacado, me he sorprendido de lo ordenado y bien etiquetado que están todos los componentes, muchos de ellos ya vienen preensamblados por lo que no importa que tú conocimiento sobre electrónica sea nulo (como es mi caso, soy enfermero y nunca había visto una de estas en vivo), el manual de armado te muestra una serie 12 pasos ilustrados (sin letras, ni instrucciones escritas) al principio parece complicado pero una vez que empiezas te vas de corrido, la verdad es que a mí me ha tomado unas 2 horas armarla por completo pero recordando que mi conocimiento sobre su funcionamiento es casi nulo además de que me tomaba mi tiempo para examinar cada parte para apreciar lo bien echo que está todo, al final te queda una estructura bastante sólida con perfiles de aluminio y aleaciones metálicas que no se tambalea ni un pelo al imprimir, viene con espátula, unas pequeñas pinzas de corte y toda la tornillería con sus respectivas llaves, no he tenido que tomar ni una sola herramienta de mi casa para armarla, incluye un poco de filamento PLA y una memoria de 8gb con un diseño precargado para imprimir después de que la hayas calibrado, me he quedado totalmente satisfecho con la compra, el envío ha tardado unos 5 días en llegarme (provienente de China hasta Chihuahua, México), escogí DHL por la buena experiencia que he tenido con ellos, pues en fin, super recomendada está Ender 3, me ha encantado, felicidades Creality y gracias por hacer la impresión 3d accesible para todos

    Sep 29,2018

    Was this review helpful?

  • SteveHK
    Ender 3 - good pricing, easy to use, good end product.
    I am a hobbyist and like to build and paint miniatures to a tabletop gaming standard. This was my first foray into the world of 3D printing ad had done a bit of research online looking at different brands. I chose the ender 3 based on reviews that were confident it was a decent machine, and based it on pricing as a selection over other models. Sure others may be better, reflected by a higher price, but I wasn’t sure how much better.

    This was easy to build for a first timer. The diagrams were helpful - though a bit simple - luckily everything fits in a rather logical way - mostly in one direction only so it is difficult to make a mistake. Just dry fit pieces before screwing it on. Software usability it comes with CURA - splicing tool for setting up your 3D print model. Ender 3 comes with advised settings -‘very useful for beginner, which after awhile printing a few models - I started to follow the models designers suggestions to refine the prints and make them more efficient.

    Look online for “bed levellling” for some tips and advice for calibrating the height of the bed with the printing nozzle.

    Ship out time was fast - within a day, and shipping to my home within a week (Hong Kong).

    This really was just almost “plug and play”. Build and start printing in 1hr tops.

    Oct 22,2018

    Was this review helpful?

  • Keefieboy
    Brilliant Bargain Printer
    This is an excellent 3D printer, not just for newbies, but for people who have other machines. It is very solidly built, nearly all metal and there are no 3D printed parts. Even though it comes as a kit, I didn't have too much trouble assembling it, and I am not mechanically minded.

    CRITICISMS
    The base assembly was a little bit rocky and I had to remove and re-fit one of the bottom rails.

    There were a couple of places where I went wrong, specifically I mounted one of the uprights the wrong way round and I had a tough time mounting the Z-axis rail to the Z-axis motor and extruder assembly - the instructions on these items could be improved.

    I don't like that the back of the display/control unit is exposed.

    The wiring is a bit messy.

    No automatic bed levelling

    PRAISE
    The printer works very well and can produce excellent prints.

    It is very solidly built - no wobbly bits.

    The bed and nozzle heat up pretty quickly.

    It is ridiculously cheap.

    CONCLUSION
    Anyone interested in getting into 3D printing should look at this printer. The price is amazing and the quality of the printing is far better than I would have expected from such a cheap machine. Overall, I'm very happy and would totally recommend the Ender 3.

    Aug 31,2018

    Was this review helpful?

  • Alex
    Creality Ender 3 - лучшее соотношение цена-качество
    Поставил пять потому , что принтер соответствует описанию. Пришел полный комплект, за исключением одного винтика для фиксации вала оси z в муфте.

    Я долго выбирал принтер и все таки остановился на Creality. Меня подкупила простота сборки и соответственно быстрое начало печати, а так же жесткость алюминиевого каркаса, по сравнению с акриловыми аналогами(по цене) Anet.

    Есть мелкие недостатки которые легко исправить распечатав на самом же принтере детали(направляющие для филамента, сопло для обдува модели, крышка вентилятора охлаждения контроллера), но есть и один недостаток который мне в течении недели не удалось устранить - это неправильно спроектированное крепление вала оси z, из за чего вал крепится криво и снижается продолжительность его "жизни"(так что нужно готовиться к замене вала и бронзовой гайке или проектировать модернизацию самому).

    Принтер (на момент написания отзыва) к покупке рекомендую. Для меня он оказался тем, что я и ожидал: работяга, к которому нужно найти подход, но это не так уж и сложно.

    Oct 27,2018

    Was this review helpful?

  • Юрий
    Ender 3 first impressions
    Заказал принтер на распродаже за 12221,32 со страховкой. Доставка заняла более месяца в Москву, товар реально шёл из-за границы. Лучше бы переплатил и заказал на али и товар пришёл бы целым. Товар был доставлен курьером, коробка была сильно помята. После вскрытия все детали выглядели целыми. Сборка заняла 30 минут. Оказалось, что во время доставки помяли коробку, и принтер в собранном виде стоял на 3-х ногах. Из-за плохой упаковки и деформации профили сместились. Пришлось перебирать весь принтер целиком, выставлять горизонты, промерять штангенциркулем и перезатягивать все крепления. На это ушло часа 4. После этого выставил стол, выставил настройки в Cure и принтер начал отлично печатать прямо из коробки. Да, очень шумный, особенно шаговые моторы. Сразу заказал демпферы и установил, теперь остался шум вентиляторов. Их тоже нужно заменить. Так же заказал smoother'ы на шаговые моторы, улучшенные коннекторы тефлоновой трубки и другую трубку, более высокого качества. В целом если не хотите геморроя с перезатягиванием креплений, переплатите 500-1000р и закажите на али с доставкой со склада в России.

    Oct 24,2018

    Was this review helpful?

  • Eric
    Great printer for that price!
    Received my printer 2 days ago, took bit more then a month to arrive in Belgium.

    Assembly was pretty easy and took about 1 hour. Mine came with removable printing surface, not glued to the print bed, happy with that.

    I'm verry pleased with the first print results i got from it straight out of the box, with no tweaking at all. Used Cura as slicing software using Creality CR-10 profile just changed the build volume size to fit the Ender 3. Test prints with PLA at 200°C nozzle and 60°C bed (real surface temp was about 50°C). With the bed 'leveled' properly the prints sticked to the bed with no problems, after letting them cool down a while they came of the bed without any problems. The test cube (20x20x20) print deviates +/- 0.15mm which is pretty good i think, can maybe be improved after some tweaking. Even managed to print with HIPS-fillament with no problems (240°C nozzle and 120° C bed, measured surface temp +- 90°C). Nozzle and print bed heat up fast.

    Overall I'm verry pleased with this printer, I cannot compare to other ones but I think you cannot find better in this price range (or even more expensive ones).

    Oct 18,2018

    Was this review helpful?

  • PapaBless
    Ender 3 is amazing and highly recommended.
    This is my first 3D printer and for me I couldn't be happier with the experience. The price point is amazing and after doing a lot of research (Youtube, Top 10 articles, and such) I chose the printer. The set up process takes some time and the instructions can leave you a little confused, but I recommend building with a Youtube video of others assembling it. The set up overall was not frustrating. I have probably printed over 100 hours already and haven't had any major issues. I have upgraded the printer some with stepper motor dampeners for the noise (stock wasn't that noisy but silence is nice). I upgraded the feeder to an all metal one from Amazon and got better PTFE tubing (Capricorn XS). Also got a glass bed which works great and interestingly my printer came with a removable plate that lightly bends as opposed to the sticker textured surface that all the reviews showed but it was a nice surprise. I can't recommend the printer enough the quality of the prints are great for the price and I am extremely happy.

    Sep 14,2018

    Was this review helpful?

  • luis
    Better than other more expensive options
    First, I received the product after three weeks, I'm in mexico and postal services are not efficient so I was surprised when this arrived so quickly. Second I didn't have to pay any import tax for this product. So whomever in mexico wondering if they will receive their product, have tranquility, this was my first purchase from gearbest, but so far I have bought another three items with similar results.

    Coming to the 3D printer, this was my first 3d printer, and it allowed me to get into this hobby without having to spend a lot of money and learn and improve. Being this a a basic printer with what I consider necessary I highly recommend it. I have printed using PLA, TPU, PTEG so far with success, of course, you need to do your research, and troubleshooting, but that's the thing with 3D printing, it is an art.

    So friends of mine have gone for some other more fancy and pricey printers and comparing their results, I notice no difference or this printer produces better results. So price quality, I gave this a five.

    Sep 26,2018

    Was this review helpful?

  • Alexey Anosov
    3d принтер ender-3
    1. Доставка заняла 23 дня, из который 19 дней доставлялась по Китаю к границе России, доставлялась методом RU Line. Доставка по России производилась IML. Вроде быстро, но сервис вообще не о чем, полный геморрой. Что бы получить эту посылку пришлось объехать пол города. Курьер отказался доставлять ее до дома и даже отказался привезти ее в более ближний пункт самовывоза IML... Не советую заказывать доставку методом RU Line.
    2. Понравилось качество печати, прямо из коробки печатает хорошо. В подарок положили 5 метров филомента, запасное сопло на 0,4 мм.
    3. Не понравилось то, что моторы и двигатели гудят громко, при команде AutoHome, двигатели моментально стартуют и появляется не приятный звук и прощелкивание ремня из-за резкого старта.
    4. Стол вроде ровный, но не понравилось то, что пленка крепится на защёлки, удобнее было если она клеилась намертво.
    5. Нагрев стола длится около 30 секунд до 60°С, а до 110°С за 120 секунд, максимально греется до 127°С.
    6. Принтер собирал не долго, около 3 часов.
    7. В целом я доволен принтером и рекомендую его к покупке.

    Nov 04,2018

    Was this review helpful?

Uw recent bekeken artikelen

Gepersonaliseerde aanbevelingen bekijken

Nieuwe klant? Begin hier